Crane Cams closes its doors

All the news that's fit to shift.
Post Reply
noob5,000,000
Master Standardshifter
Posts: 9380
Joined: Wed Nov 15, 2006 10:57 pm
Cars: 1986 Mazda RX-7 x2
Location: Sterling Heights, Michigan
Contact:

Crane Cams closes its doors

Post by noob5,000,000 »

http://www.news-journalonline.com/NewsJ ... 022409.htm
Crane Cams shuts down, workers laid off

By JIM WITTERS
Senior Business Writer

DAYTONA BEACH — Crane Cams, a 56-year-old auto parts manufacturer, closed its doors this week and laid off its employees, a worker said today.

The news took Volusia County’s top economic development officer by surprise. City, county and state officials were working with Crane Cams and officials from its New Jersey parent, Mikronite Technologies, to keep the company open and in the community.

“We were trying to help them through this transition,” said Rick Michael, Volusia County economic development director. “They were considering a transfer of ownership. We were not expecting any closure.”

An automated voice mail system at Crane’s plant on Fentress Boulevard announced at midday today the company was closed and suggested calling back during business hours, 8 a.m. to 5 p.m. A call to Mikronite’s New Jersey offices produced similar results. Six cars sat in the parking lot early this afternoon at the local plant, which employed 220 just three years ago.

Inside the lobby, a reception desk sat empty. A call from the lobby phone got an answer from Dennis Burgess, who declined to comment and said no one at the plant could provide information.

In the parking lot, 14-year employee Ronald Dorn was leaving the plant for what he believed was the last time

He said workers were told during the past week that layoffs were likely, but he didn’t expect the plant to close.

Mikronite received approval in 2006 to receive tax rebates from the state and the county amid discussion about moving its New Jersey operations here. But the company ended its contract with the state in 2008 due to nonperformance, Michael said.

“Crane has gone through a series of small layoffs recently,” he said.

Crane Cams and Crane Technologies Group were founded by Harvey J. Crane Jr. in 1953 as Crane Engineering Inc. in Hallandale. The company is well known in high-performance and racing circles for its line of camshafts and engine valve train components.

In 1979, Crane Cams became an employee-owned company. Some operations moved to Daytona Beach in 1981, with the remainder of the operation and employees relocating here in 1985.

Mikronite, an industrial technology firm, bought Crane in 2006.

In March 2007, Mikronite sold its property on Fentress to STAG Capital Partners of Boston, then signed a 10-year lease.
That's so crazy. Not even the biggest aftermarket companies are safe...
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
Rope-Pusher
Master Standardshifter
Posts: 11607
Joined: Mon Mar 16, 2009 3:44 pm
Cars: '08 Jeep Liberty
Location: Greater Detroit Area

Re: Crane Cams closes its doors

Post by Rope-Pusher »

That's just crazy. How do they expect to make cams now?
'08 Jeep Liberty 6-Speed MT - "Last of the Mohicans"
User avatar
theholycow
Master Standardshifter
Posts: 16021
Joined: Tue Jun 24, 2008 1:36 pm
Cars: '80 Buick LeSabre 4.1 5MT
Location: Glocester, RI
Contact:

Re: Crane Cams closes its doors

Post by theholycow »

Rope-Pusher wrote:That's just crazy. How do they expect to make cams now?
They'll have to do it without using a crane.
Image
1980 Buick LeSabre 4.1L 5MT

Put your car in your sig!

Learn to launch/FAQs/lugging/misused terms: meta-sig
watkins wrote:Humans have rear-biased AWD. Cows have 4WD
Post Reply