More clutch paranoia: shift shock

Read the FAQ and still not sure about something? Want to shift faster? Post here.
Post Reply
JusCruzin
Junior Standardshifter
Posts: 41
Joined: Sat Jan 01, 2011 10:02 pm
Cars: 2008 BMW E90 M3
Location: Los Angeles, CA

More clutch paranoia: shift shock

Post by JusCruzin »

Been driving stick for about 2 months now, and still struggling with smooth downshifts. I'm hesitant about practicing rev matching much due to paranoia that shift shock from a poorly executed downshift could damage the car. Am I being overly paranoid? Does shift shock cause damage?
User avatar
Tups
Master Standardshifter
Posts: 2229
Joined: Sun May 03, 2009 4:37 am
Location: Suomi Finland Perkele

Re: More clutch paranoia: shift shock

Post by Tups »

What's a shift shock?
2007 Ford Focus ST225
1982 Ford Escort Mk3
User avatar
six
Master Standardshifter
Posts: 4674
Joined: Thu Mar 16, 2006 4:45 pm
Cars: 2015 Chevrolet SS 6MT
Location: California, U.S.

Re: More clutch paranoia: shift shock

Post by six »

You're being overly paranoid. While it is true that excessive shift shock can cause extra wear on drivetrain components, I doubt you are shocking the drivetrain at that level given your attitude towards it.

If you are worried about shift shock, smooth it out with the clutch. That's what it's for. Clutch wear is minimal when used this way, and replacing a clutch disc is much easier and cheaper than replacing other drivetrain components. Besides, shift shock from an un-rev-matched downshift is much more severe than a poorly rev-matched one, since no matter how badly you estimate the rev-match, the RPM difference is [should be] less than not rev-matching at all. If in doubt, smooth it out with some clutch slippage like I said above. And keep practicing those rev-matches. :)
Image
2015 Heron White Chevrolet SS Sedan 6MT
User avatar
theholycow
Master Standardshifter
Posts: 16021
Joined: Tue Jun 24, 2008 1:36 pm
Cars: '80 Buick LeSabre 4.1 5MT
Location: Glocester, RI
Contact:

Re: More clutch paranoia: shift shock

Post by theholycow »

Tups wrote:What's a shift shock?
Jerking from a rough shift (or even the minor tug of an acceptable shift).
six wrote:replacing a clutch disc is much easier and cheaper than replacing other drivetrain components.
Which drivetrain components are at risk from excessive shift shock? I imagine the CV joints and wheel bearings, both of which are way easier and cheaper than a clutch on a FWD car. Don't forget that most of the drivetrain is the same as a slushbox, which can have a very rough downshift when you suddenly floor it while cruising and it downshifts 2 or 3 gears...it's all designed for that kind of shock.

Anyway...
Besides, shift shock from an un-rev-matched downshift is much more severe than a poorly rev-matched one, since no matter how badly you estimate the rev-match, the RPM difference is [should be] less than not rev-matching at all. If in doubt, smooth it out with some clutch slippage like I said above. And keep practicing those rev-matches. :)
Agreed in entirety!

No need to be paranoid. You're aware of the potential issues and you won't be severely abusive. Drive how you want to and it'll probably be fine.
1980 Buick LeSabre 4.1L 5MT

Put your car in your sig!

Learn to launch/FAQs/lugging/misused terms: meta-sig
watkins wrote:Humans have rear-biased AWD. Cows have 4WD
LHOswald
Master Standardshifter
Posts: 2787
Joined: Mon Apr 06, 2009 10:46 pm
Cars: '99 Civic Hatch w/B16a
Location: Enfield, Connecticut

Re: More clutch paranoia: shift shock

Post by LHOswald »

theholycow wrote:Drive how you want to and it'll probably be fine.
that how i blew up my truck...
Image
User avatar
theholycow
Master Standardshifter
Posts: 16021
Joined: Tue Jun 24, 2008 1:36 pm
Cars: '80 Buick LeSabre 4.1 5MT
Location: Glocester, RI
Contact:

Re: More clutch paranoia: shift shock

Post by theholycow »

LHOswald wrote:
theholycow wrote:Drive how you want to and it'll probably be fine.
that how i blew up my truck...
Don't drive how LHOswald wants. :lol:
1980 Buick LeSabre 4.1L 5MT

Put your car in your sig!

Learn to launch/FAQs/lugging/misused terms: meta-sig
watkins wrote:Humans have rear-biased AWD. Cows have 4WD
watkins
Master Standardshifter
Posts: 15880
Joined: Sun Jul 01, 2007 12:42 am
Cars: '08 Saab 9-5 Aero wagon
Location: Salem, MA

Re: More clutch paranoia: shift shock

Post by watkins »

Shame, Osballs. Shame!
LHOswald
Master Standardshifter
Posts: 2787
Joined: Mon Apr 06, 2009 10:46 pm
Cars: '99 Civic Hatch w/B16a
Location: Enfield, Connecticut

Re: More clutch paranoia: shift shock

Post by LHOswald »

listen, when your first vehicle is 5-speed and cost $500 and im paying $200 a month just to insure the f*cking thing...you get the idea.
Image
User avatar
theholycow
Master Standardshifter
Posts: 16021
Joined: Tue Jun 24, 2008 1:36 pm
Cars: '80 Buick LeSabre 4.1 5MT
Location: Glocester, RI
Contact:

Re: More clutch paranoia: shift shock

Post by theholycow »

$200/mo insurance on a $500 vehicle is reason to drive slower, not faster...the last thing you need is a ticket or a blown up truck.
1980 Buick LeSabre 4.1L 5MT

Put your car in your sig!

Learn to launch/FAQs/lugging/misused terms: meta-sig
watkins wrote:Humans have rear-biased AWD. Cows have 4WD
LHOswald
Master Standardshifter
Posts: 2787
Joined: Mon Apr 06, 2009 10:46 pm
Cars: '99 Civic Hatch w/B16a
Location: Enfield, Connecticut

Re: More clutch paranoia: shift shock

Post by LHOswald »

never got a ticket, did get a blown up truck though >.<
Image
Charles421
Senior Standardshifter
Posts: 123
Joined: Tue Apr 05, 2011 11:59 am
Cars: 2011 BMW 335i Coupe, 6MT
Location: Philly, PA

Re: More clutch paranoia: shift shock

Post by Charles421 »

I found it very useful to learn rev-matching on downshifts, especially if you're traveling towards a red light that suddenly turns green. If I'm at ~35 MPH when that happens, for example, I get off the brake, clutch in, shift to 2nd, blip the accelerator to reach ~2.7-2.8k RPM and clutch out when it gets to ~2.5k quickly. No shift shock at all. By doing this I am in the ideal position to take the turn.
The whole downshifting process takes me 2-2.5 seconds, some people can do it a lot faster than that with practice (esp. w/ heel-toe. The method I described IS heel-toe without the brake part ;)).

Take some time on a straight empty road and learn to blip the accelerator. Get up to 40 MPH or whatever you're comfortable with, shift to neutral, then put your toes/balls of your foot on the accelerator pedal and give it a push. Don't be shy about the push.

Once you are fairly confident you can blip it and hit a target RPM (say, 3k), start experimenting with letting the clutch out to catch the next gear down. Know the RPM your car will be at in the gear you want to shift to. Pick one downshift to start and work on it exclusively - I started with 4>3. If I'm traveling in 4th at 2.2k RPM, I know I have to blip past 3k and let the clutch out at 2.9K to catch 3rd smoothly.

If anything, to start with blip it a bit further than you have to - don't be shy like I said. If you blip it a few hundred RPM higher than necessary, at least you have a good chance of catching the downshift at the right RPM. If you give it too little gas, you're guaranteed to have shift shock because the transmission is moving faster than the engine.

After a while you won't be looking at the tach anymore, you'll just know exactly how much pressure to apply and when to clutch out based on muscle memory. It's not something that's learned in a day.
2011 BMW E92 335i: Le Mans Blue, M Sport, 6MT w/ CDV Mod, BMW Performance Exhaust + Style 269 19" Wheels
Post Reply