The Neverending Probelem UPDATED: drag racing stuff from wed
-
- Master Standardshifter
- Posts: 1563
- Joined: Thu Aug 16, 2007 5:05 am
- Cars: 95 VW Golf
- Location: Los Angeles, CA
- Contact:
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
yummy rust.
looks good though, gotta love new tires
looks good though, gotta love new tires
95 VR6 Golf Sport
- Bawked
- Master Standardshifter
- Posts: 2417
- Joined: Wed Aug 29, 2007 12:24 am
- Cars: 08 JDM Subaru Impreza STI
- Location: New Zealand
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
mang thats some bad rust there! Nice rubber though!
u run 245s all round??? Thats too much rubber for a n/a car.... especially fwd...
u run 245s all round??? Thats too much rubber for a n/a car.... especially fwd...
<3 fwd
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
Those tires got a really good rating, wow. How much, and how much did it cost to mount them?
- ihartmacz
- Senior Standardshifter
- Posts: 983
- Joined: Fri Jul 28, 2006 1:45 am
- Cars: 1998 Ford Mustang Coupe
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
With a FWD V6, you need some rubber if you're going to be racing off the line. The only thing that they're going to hurt is fuel economy.
Just don't give it too many full-boar starts or you'll end up replacing your transaxle, too.
edit: You've got ABS? I think I seen a tone-wheel in that picture of your wheel hub.
Just don't give it too many full-boar starts or you'll end up replacing your transaxle, too.
edit: You've got ABS? I think I seen a tone-wheel in that picture of your wheel hub.
-
- Master Standardshifter
- Posts: 2472
- Joined: Sun Sep 21, 2008 1:48 am
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
shes a 13 year old michigan salted roads snow whore, your junk will look just like that when its that old.
dont hate on the 245s, i could barely hook the goodyears you can see in the background of the 2nd pic. thats an extra half inch of sidewall on those tires. spinning tires with a 2800rpm launch is weaksauce.
these are 245/40/17s, 1 inch less overall diameter than 245/45s, so even less sidewall but i have a feeling they will hook better anyway just because michelin > goodyear.
i do run 245s, i love how the car looks with mustang rims and 245s, it hits the spot for perfect wheel offset and the mean look from behind when you expect to see pizza cutters and see 245s, they do look wide on my car
i have ABS but my driver side axle doesnt have the trigger wheel so my ABS doesnt work.
the tires were 110 shipped and 20 bucks to mount. they cost 236 a tire new, and as you can see, these have a shit ton of tread on them
and damn do these things stick to the road. its on rails now, i love it.
dont hate on the 245s, i could barely hook the goodyears you can see in the background of the 2nd pic. thats an extra half inch of sidewall on those tires. spinning tires with a 2800rpm launch is weaksauce.
these are 245/40/17s, 1 inch less overall diameter than 245/45s, so even less sidewall but i have a feeling they will hook better anyway just because michelin > goodyear.
i do run 245s, i love how the car looks with mustang rims and 245s, it hits the spot for perfect wheel offset and the mean look from behind when you expect to see pizza cutters and see 245s, they do look wide on my car
i have ABS but my driver side axle doesnt have the trigger wheel so my ABS doesnt work.
the tires were 110 shipped and 20 bucks to mount. they cost 236 a tire new, and as you can see, these have a shit ton of tread on them
and damn do these things stick to the road. its on rails now, i love it.
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
So these are used tires, where did you get them?
-
- Master Standardshifter
- Posts: 2472
- Joined: Sun Sep 21, 2008 1:48 am
-
- Master Standardshifter
- Posts: 2472
- Joined: Sun Sep 21, 2008 1:48 am
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
so my passenger side CV was dislocated, i assume when my mount broke the other day. i pulled it apart and put it back together the right way, and it hasnt made a sound driving to school and back today. looks like i lucked out and will get away with some grease and a new CV boot. couple bucks for that > 60 dollar new axle
-
- Master Standardshifter
- Posts: 6927
- Joined: Sun Apr 20, 2008 5:51 pm
- Cars: 1994 Corolla, 1990 Miata
- Location: Chicago, IL
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
Sort of off topic but whatevs. I saw a Viper at a dealer today: 345'S!!! I was lovingly appalled by how wide the looked from the rear.
-
- Master Standardshifter
- Posts: 2472
- Joined: Sun Sep 21, 2008 1:48 am
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
and you know what. that viper cant hook those street 345s to save its life.
-
- Master Standardshifter
- Posts: 6927
- Joined: Sun Apr 20, 2008 5:51 pm
- Cars: 1994 Corolla, 1990 Miata
- Location: Chicago, IL
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
Hell yea, what can you expect from a car with a 500 horse engine and a truck drivetrain? I wonder if some nice grippy 375's will fit...permabanned wrote:and you know what. that viper cant hook those street 345s to save its life.
-
- Master Standardshifter
- Posts: 2472
- Joined: Sun Sep 21, 2008 1:48 am
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
yay axle. it finally let go last night when i was leaving the TT hangout and i was talking online to this girl that was there when i left and she said that i spilled parts and fluid on the ground when i was leaving, on top of the sound of someone jackhammering my car. doubt that was fluid, maybe some CV grease, but the axle is poop
im sure thats not how it came when it was new
im sure thats not how it came when it was new
-
- Master Standardshifter
- Posts: 9380
- Joined: Wed Nov 15, 2006 10:57 pm
- Cars: 1986 Mazda RX-7 x2
- Location: Sterling Heights, Michigan
- Contact:
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
Damn, that sucks donkey penõr. Will you be able to get another one before the AutoX?
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
- Bawked
- Master Standardshifter
- Posts: 2417
- Joined: Wed Aug 29, 2007 12:24 am
- Cars: 08 JDM Subaru Impreza STI
- Location: New Zealand
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
tsk tsk u should of never fixed the lug... now u got this big problem
<3 fwd
-
- Master Standardshifter
- Posts: 2472
- Joined: Sun Sep 21, 2008 1:48 am
Re: The Neverending Probelem UPDATED: drag racing stuff from wed
got a new axle. 48 dollars out the door at napa, autozone can eat 1 penis with their 60 dollar axles. only problem is that money that i spent on the axle was supposed to be spent on gas to get to autox and autox. so looks like no cone munching for me tomorrow, but at least the car will be fixed as soon as i get off my ass and put the axle in